Your Current Position:  SOLUTIONS
  • Band-Aids detection


    I.          Stains on core pad

    a)        Stains on core pad larger than 0.5 mm in size

    b)       Stain type: black spots, insects, dark glue, dark oil and etc.

    II.       Gap between two core pads > 1mm

    III.      Core pad position deviation > 1mm

    IV.     Core pad absence


          Stains on core pad                        Detection interface                           Control cabinet              

                 


  • Mask detection


    I.          Stains on surface fabrics

    a.      Stains on surface fabrics larger than 0.5 mm in size;

    b.      Stain type: black spots, insects, dark glue, dark oil and etc.

    II.       Nose bridge missing, length discrepancy


      Nose bridge missing              Nose bridge detection              Stains on surface fabrics          Stains on surface fabrics  

                                


  • Sanitary napkin detection


    . Stains

    a.      Product surface stains larger than 1 mm in size;

    b.      Stain type: black spots, insects, dark glue, dark oil and etc.

    . Transfer layer detection

    a.      Missing, corner folded, skew

    b.      Position deviation >5mm; single-piece width deviation ±3mm

    .  Pad core detection 

    a.      Missing, corner folded, skew, insufficient

    b.      Position deviation; corner folded

    IV. Wings

    a.    Abnormally folded inside or outside


                  Contamination detection                                   ADL detection                                                                      

                    

                       Pad core missing                                                          Black splicing tape detection

                    




  • Diaper detection



    I.          Stains

    a.      Product surface stains larger than 1 mm in size;

    b.      Stain type: black spots, insects, dark glue, dark oil and etc.

    II.       Pad core detection 

    a.    Missing, corner folded, skew, insufficient

    b.    Position deviation; corner folded

    III.      Frontal tape detection

    a.   Missing, corner folded

    b.   Position deviation >10mm

    c.   Single-piece width deviation >±5mm 

    IV.     Side tape detection

    a.   Missing, corner folded

    b.   Position deviation >5mm

    c.   Single-piece width deviation >±2mm 

    d.  Tapes open

    V.       Elastic waist band detection

    a.   Missing

    b.   Position deviation >10mm

    c.   Ends broken >10mm; single-piece width deviation >±10mm


             Stains & Frontal tape detection                              Stains & Side tape detection               

                             
     
              Elastic waist band detection                                Black splicing tape detection